Page 33
INSTALLATION AND OPERATING INSTRUCTIONS
•
If the sensor or cuff was not properly installed, or an error occurs, the unit will display a warning window and
alarm messages similar to the example below:
■
Adjust the Pulse sensor and touch the Next button
to try again, or the Cancel button to exit and
return to the default GUI view.
■
The meanings to the alarm messages are found in the
ALARM CONDITIONS
table.
•
Touch the Cancel button to cancel the LOP at any time. The System will alarm “LOP STOPPED.”
•
Touch the Cancel button again to exit the LOP function.
9
The
A.T.S.
4000TS begins to infl ate the cuff incrementally while continuously evaluating the patient’s pulse:
•
The LOP determination will last approximately 30 seconds depending on the quality of the pulse signal and
patient’s physiological characteristics.