Page 14
INSTALLATION AND OPERATING INSTRUCTIONS
Feature
What it does
14
LOP Sensor Port
Port used to connect the Zimmer LOP sensor.
15
LOP Sensor Storage
Recess area used to store the LOP sensor when not in use.
16
Battery Compartment
Compartment that holds the
A.T.S.
4000TS’s backup battery.
17
Alarm/Warning Light
Alarm priority indicator. This light will fl ash and change color to yellow or
red depending on the alarm priority (see
Alarm Conditions
section for
details).
TOUCH SCREEN GUI
The
A.T.S.
4000TS Graphical User Interface (GUI) consists of RED Main Cuff displays and controls on the left side
and otherwise identical BLUE Second Cuff displays and controls on the right side. Additionally, GRAY general System
functions are located on the bottom center of the screen. GUI function details:
GUI Component
What it means
Cuff Status Displays
Text describing the status of the corresponding cuff, including “
DEFLATED
”,
“
INFLATED
”, “
DEFLATING
”, “
INFLATING
”, or “
WARNING
”. A cuff’s status bar also
changes color to yellow in the “
WARNING
” state.
Cuff Controls
INFLATE , DEFLATE , LOP
, and Stats
functions for the Cuffs.
Infl ation of the Main Cuff or Second Cuff is initiated by touching the red Main Cuff
INFLATE (INFL) button or blue Second Cuff INFLATE (INFL) button depending
on which cuff is desired to be infl ated.
Defl ation of either Cuff is initiated by
TOUCH, SLIDE, and HOLD
the DEFLATE
(DEFL) button . For greater safety, each DEFLATE (DEFL) button has a delay at
the end of the slide and therefore must be held for approximately 2 seconds before the
unit will allow a cuff to defl ate.
When a cuff control function is unavailable (i.e. the “INFLATE” function when the cuff is
already infl ated), it is shown in a fl at, dimmed state.
Main Cuff
Status Display
Main Cuff
Pressure
Display Tile
Main Cuff
Controls
Main Cuff
Time
Display Tile
Second Cuff
Status Display
Second Cuff
Pressure
Display Tile
Second Cuff
Controls
Second Cuff
Time
Display Tile
System
Functions Menu