Zhermack C306700, User Manual

Page: 123 / 168

123 of 168
MAINTENANCE AND USE MANUAL
EN
SATOVAC
If you are using compressed air for cleaning purposes you must always wear eye
goggles and a mask that covers your mouth and nose. Do not allow anyone near the
equipment as they could be hit by flying dust; air pressure must not exceed 2 bar.
CHAPTER 8: MAINTENANCE
8.1
CLEANING
The machine exterior can normally be kept clean just by wiping it with a dry cloth. If necessary, wet
the cloth just a little water or use a non-degreasing detergent.
Never use inflammable, corrosive, alkaline or toxic liquids when cleaning the
equipment.
Before cleaning the equipment exterior always turn the main switch to OFF. It is
strictly forbidden to clean the equipment while it is connected to the mains power
supply.
8.2
ROUTINE MAINTENANCE
Once the machine has been cleaned (see section 8.1) the operator must check for worn, damaged or
loose parts. If any such anomalies are discovered contact your Authorised Servicing Centre.
Should any of the above anomalies be discovered it is strictly forbidden to restart the
equipment before such faults have been set right.
Equipment safety devices/guards must never be removed except for repair and
maintenance purposes.
Such items must be replaced as soon as the situation which led to their removal no
longer exists and in any case before the equipment is used again.
More precisely, should the operator note any defects or problems of any kind whatsoever he/she
must place a warning sign on the machine indicating that maintenance work is in progress and that
using the machine is forbidden (EC-compliant signs can be purchased from the relevant suppliers).
Routine maintenance, cleaning and proper machine use are essential factors in guaranteeing long-
lasting machine performance and safety.