Zhermack C306700, User Manual

Page: 107 / 168

107 of 168
MAINTENANCE AND USE MANUAL
EN
SATOVAC
Zhermack cannot be held liable for any damage to persons or objects caused by
incorrect maintenance carried out by unqualified personnel or maintenance work
that does not comply with the instructions in this manual.
Zhermack is, as of this moment, exonerated from any liability concerning injury to
persons or damage to objects that may result from using this equipment in a way
other than that described in this manual.
This equipment has electrical parts: therefore, in the event of a fire, no matter how
small, use only powder-type extinguishers. Never attempt to put out an electrical fire
with water.
• for safety reasons the machine must be switched off if there is a mains power failure;• should the
machine be installed on machine items, make sure that the attachment fittings are secure, that they
comply with safety regulations and do not constitute a potential source of danger for users;
• since the machine is air-cooled, check that the machine is positioned in an adequately ventilated
area and is placed at least 10-15 cm from any wall;
• do not directly expose the machine to atmospheric agents;
• since the pump uses a vacuum to aspirate the oil from the casing and lubricate its internal parts it
is recommended that you do not operate at pressures in excess of 100 mbar for prolonged periods;
• use protective gloves during oil filling and draining work.