Zetor FORTERRA HSX 100 2014, Operator'S Manual

Page: 95 / 250

96
RUNNING IN THE TRACTOR
F11N030 F11N031
GENERAL PRINCIPLES FOR RUNNING IN THE NEW TRACTOR IN THE
COURSE OF THE FIRST 100 HOURS OF OPERATION
During the first 100 operation hours:
- Load the engine normally
-
Avoid operation under partial loading of the engine
-
Avoid excessive idle run
-
Frequently check the oil level in the engine (increased oil consumption is normal in
this period).
-
Check screw connections mainly of the supporting parts of the tractor.
-
Immediately remove all established shortcomings; thus, you will prevent
subsequent damage and possible impairment of operation safety.
- Proceed in the same way after a general overhaul of the tractor as well.
DURING THE FIRST 10 HOURS
- Run in the tractor in the transport
regime.
- Tighten the fitting nuts of the front and
rear wheels, including the bead / rim
connections at the prescribed torque.