
63
DRIVING OPERATION
FH12N053 F11N012 F11N013
BEFORE YOU START
Before you start the engine, make
sure that:
1.
the tractor is properly braked.
2.
the main gear shifting lever of
gears in neutral position.
3.
Reversing lever is in neutral
position
4.
PTO switches on the right col-
umn of the cabin are off
If clutch pedal is not depressed
the tractor cannot be started –
start protection switch is not
switched
IF YOU DO NOT SUCCEED IN
STARTING THE ENGINE
Return the key to "0" position. Wait 30
second and repeat the start.
Never help the stopping engine
by a starter. You are being ex-
posed to the danger of starter
damage.
NON-PERMITTED STARTING
It is forbidden to start the tractor
by short-circuiting the starter
clamps. Start only from the driv-
er´s seat.
It is necessary to disconnect minus
pole of accumulator and all the
shifting levers including PTO shaft
shifting lever to be shifted in neu-
tral position with any manipulation
or repair of the starter. The start-
er´s clams are covered with a cap.
Summary of Contents for FORTERRA HSX 100 2014
