Zetor FORTERRA HSX 100 2014, Operator'S Manual, Page: 211 / 250

212
MAINTENANCE INSTRUCTIONS
F_02_122a
MAINTENANCE AND TREATMENT OF TYRES
Regularly check the outer surface of tyres and verify whether they are free of defects
at the sides and over the bead and whether the reinforcement is not damaged.
Do not use tyres that show a defect any longer.
TYRE INFLATION
The basic recommended inflation values are specified in the table. Regularly check
the tyre pressure before driving, when the tyres are cold. To inflate the tyres use the
pressure controller (B), which acts as a pressure equalizer, tyre filling device and
safety valve. Remove the rubber cap of the pressure controller and screw a tyre infla-
tion hose instead. Screw the hose up to the end of the thread to compress the non-
return valve. If there is the maximum pressure in the air reservoir (A), the tyres can-
not be inflated. In this case you must first reduce the pressure with the condensate
drain valve located in the bottom part of the air reservoir (A). After inflating the tyres
you must put the rubber cap back on the pressure controller.