Zetor FORTERRA HSX 100 2014, Operator'S Manual, Page: 224 / 250

225
ADJUSTMENT
F_02_129 FH12N011 FH12N012
CALIBRATION OF TRAVEL SPEED OF
DIGITAL DASHBOARD
Dashboard is calibrated after the assem-
bly at the production plant.
Do the repeated calibration:

After significant wear of tyres

When mounting new tyres

When replacing dashboard
CALIBRATION PROCEDURE

Mark a track of 100 m at a suitable lo-
cation

Inflate the tyres of the tractor to pre-
scribed pressure, see tables of this In-
structions manual

Start the engine

Bring the tractor to the beginning of the
100-metre track

Press button (A) and button (B) simul-
taneously. Keep the buttons pressed
down for 7 sec. There will be a sound
signal and on the display a sign will be
displayed “
Road Constant ” / “ Self
Learning ”

Release both buttons (A) and ( B

Start driving the tractor at a constant
speed of approximately 10 km.h
-1

After travelling the entire distance of
100 m, stop the tractor at a designated
end of track (see fig. F_02_129)

press (A) button.

If the calibration had been faultless,
there will be a acoustic sign and
“
Pulse ” text will be displayed.

After 3 sec, calibration value will be
displayed on a display

After another 2 sec, calibration is fin-
ished automatically, dashboard is cali-
brated and ready for operation

If “ Error ” / “ Out of Range!!! ” is dis-
played, it means that the calibration
has not been completed and it is nec-
essary to repeat it.