Zetor FORTERRA HSX 100 2014, Operator'S Manual, Page: 243 / 250

244
INDEX
Dead start by means of automatic dead start function 72
Dead start of the tractor 72
Dead start of tractor in regular operation - automatic
dead start function
72
Dead start of tractor in regular operation – clutch pedal 73
Dependent and independent rear pto shaft revolutions 110
dependent rear pto shaft revolutions 540/1000 with
nominal engine revolutions (2200 rpm)
239
Description of minor errors of the EHR-B electro-
hydraulic system
141
Description of the functions of individual positions of
control levers of the hydraulic distributor
127
Diesel particle filter 85
Diesel particle filter – system failures signalization 86
Diesel particle filter failure codes 86
Diesel particle filter maintenance 217
Diesel particle filter regeneration 87
Direction lights, Lower beam head lights, head lights
and horn switches
53
Display - error messages 48
Display – change of display
47
Display – manual brake 48
Display – Resetting data 47
Display – service menu 49
Display – setting language mutation
49
Display description 46
Draining condensate from the air reservoir 210
Draining oil from the engine 196
Drive of agricultural machines 105
Drive of machines with greater inertia masses 122
Drive with front drive axle on 84
Driver´s seat 36
Driver´s seat - safety switch 68
Driving down the slope 89
Driving operation 61
Driving up the slope 89
Driving with agricultural machines attached to the front
three-point hitch
149
Dry air cleaner maintenance instructions 199
During the first 10 hours 96
E
Electric installation 167
Electric system 168
Electro-hydraulic system 131
engagement of rear pto shaft - dependent revolutions 116
Engaging rear PTO shaft - INdependent revolutions 115
Engine heating 66
Equipment “OFF” 132
External control buttons of the electro-hydraulic system 139
F
Facilitating connection of joint shaft of an aggregated
machine to the tractor
111
Fast cooling of the space of the cabin 40
Fast heating of the cabin area 39
Filling and filter replacement
180
Filling the engine with oil 197
Filling, inspection and drain opening of oil of the front
wheel reducers
207
Fixed and free position of the lower hydraulic draw-
bars
145
Foot brake adjustment 223
Foot brake check 222
Foot brakes 89