System of treatment of exhaust gases - setting
The regeneration of the diesel particulate filter in case of increased temperature of exhaust gases is
performed at higher engine load. The system of regeneration of the diesel particulate filter DPF can be
controlled through the menu of the engine setting on the instrument panel. The regeneration is operated in
two modes: The mode of automatic regeneration of the diesel particulate filter and inhibition of regeneration
of the DPF filter (for safety reasons only).
S15N023
Enter the menu of the engine setting by long pressing the button (
A
) on the instrument panel. The service
menu screen (
b
) is displayed. To enter the engine setting (
c
), choose the corresponding tab using the
buttons (
B
) and (
C
) and confirm it by longer pressing the button (
A
). The following items are displayed on the
screen:
1
- Automatic regeneration of the diesel particulate filter -
DPF Auto
2
- Inhibition of regeneration of the diesel particulate filter -
DPF Inhibit
Automatic regeneration of the diesel particulate filter - DPF Auto
The mode of automatic control of the treatment of exhaust gases. The regeneration of the filter is started in
case of need when a certain level of filling of the filter with carbon black, temperature of exhaust gases and
engine load are reached.
S15N021
DPF AUTO is set in the menu for setting the engine (
b
). After entering the tab, choose the corresponding
item using the buttons (
B
) and (
C
). Confirm the mode of automatic control of the filter regeneration (
b
) by
long pressing the button (
A
). During operation of the tractor the filter regeneration is indicated by activation of
the signal lamps of the diesel particulate filter on the instrument panel and by the subsequent acoustic signal.
If the filter is regenerated, the green signal lamp of DPF is on. An approaching defect of the system is
indicated by activation of the yellow signal lamp of DPF and if the defect of the system occurs, the red signal
lamp of DPF is activated.
For proper functioning of the diesel particulate filter it is necessary to set the system of
treatment of exhaust gases to the mode DPF AUTO, unless working conditions require inhibition of
the system for safety reasons!
SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES
73
Summary of Contents for Forterra CL 100
