Zetor Forterra CL 100, Operator'S Manual

Page: 157 / 198

Used operation liquids and filling - quantities
*- This is the standard filling of the gearbox and final drive housing. Depending on the type of work and use
of the tractor (on a slope, on a level ground, etc.) the gearbox filling should be increased (see chapter
Hydraulic system; part Oil quantity drawn from outer hydraulic outlets of this Operator's Manual). The first
filling of the gearbox and final drive housing requires an approx. 4l higher quantity of oil.
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.
ZETOR service fillings
To maintain best operational characteristics of your tractor, original operational
Zetor
fillings are
recommended to be used.
Motor oils
Engine oil
Zetor 15W40 L-SAPS
Oil in the gearbox and final drivehousing
Oil for gearing mechanisms of tractors
ZETOR 80W
Oil for the front driving axle
Oil for the front axle
ZETOR LS 80W
Oil for the hydrostatic steering of the tractors
Hydraulic oil
ZETOR HM 32
Specification of oils for Zetor engines equipped by diesel particle filter
Specification of oil for tractor transmission devices
Designation Quantity in litres
Brake liquid 0,5
Coolant 20,5
Engine oil 10
Hydrostatic steering oil 2,7
Oil of the front driving axle box 6,5
Oil of the planetary reducers of the front driving axle 2x0.6
Gearbox and final drive housing oil 52*
Front PTO gearbox oil 2,7
Urea 30
Fue 23 0
Classification ACEA Viscosity class SAE Performance class API
E9/E7 15W-40 API CJ-4/SM
Viscosity class
SAE Performance class API
80W GL-4
TRACTOR MAINTENANCE
156