ZAHD, ZAEHD 150/200-155/175
62
Testing and verification
www.zepro.com
11.2
Dynamic load test
11.2.1
Test with max. load
• Place a test load on the platform according to the table for the respective tail lift model and lifting capacity.
• Check that the lift operates correctly in the normal range of movement allowed, i.e. up, down, tilting at
ground level and tilting at the vehicle floor level.
11.2.2
Test with overload
• Place a test load on the platform according to the table for the respective tail lift model and lifting capacity.
• The test load should be 1.25 x the lift model’s max. load. Verify that the tail lift cannot lift the load when
the up function is switched on (it may however by possible to tilt up the load).
11.2.3
Dynamic load (Test load 1.0 x tail lift loading capacity). For tail lifts with
load centre of 750 mm
Capacity
Load 1500 kg
Load 2000 kg
Distance out in platform (L)
1500 kg
750 mm
-
2000 kg
1000 mm
750 mm
11.3
Test of safety functions
The tail lift functions must be tested.
Check:
•
That the red light in the vehicle cabin turns off when the platform is completely closed against the body
and that it turns on when the platform is opened (where applicable).
•
That the tail lift cannot be activated if the cabin switch is in the off position.
• That the tail lift cannot be activated when the main switch fuse is removed (where applicable).
•
That the overflow valve is activated when the lift is operated up to the vehicle floor level or end stops.
• That the tail lift cannot be lowered or tilted down if the electrical connector from the electric hose rupture
valves is removed from the lift and tilt cylinders respectively.
• That there is a “max. load” marking on the platform and it is correctly positioned according to the loading
diagram for the tail lift model concerned.
•
That warning flags and reflectors are fitted and fulfil their function correctly.
• That all safety and operating decals are installed in their respective position.
• That the platform’s mechanical lock is functioning correctly (where applicable).
• That the instructions for using the tail lift have been left in the driver’s cabin.
• That the CE declaration of conformity has been completed.
Summary of Contents for ZAHD 150/200
Page 2: ......
