ZAHD, ZAEHD 150/200-155/175
Installation
23
www.zepro.com
4.2
Platform
1. Check that all included components are clean,
cleaning them where necessary.
2. Lubricate the metal bushings on the upper bear-
ing of the arms. Ensure that the small holes on
the inside of the bushings are filled with grease.
See illustration. Use LE lubricant 4622 or the
equivalent.
3. Fit the platform to the arms using the supplied
bolts. Tighten the bolts using a torque wrench.
Tightening torque: 80 Nm.
4. Fit one of the tilt cylinders to the platform. Use
the supplied bolt and support wheel.
Tighten the bolt using a torque wrench.
Tightening torque: 80 Nm.
NOTE!
Lubricate the bushings
Image 29. Carefully lubricate the metal bushings
Image 30. Fitting the platform to the arms
Image 31. Fitting the tilt cylinder to the platform
IMPORTANT!
Make sure the cylinders are installed with the
grease nipples facing up.
IMPORTANT!
Carefully lubricate the metal bushings on the upper
bearing of the arms. Ensure that the small holes
are filled with grease. After the platform is fitted, lu
-
bricate all bearings via normal grease nipples, see
"9 Lubrication and fluid level check" on page 55.
Summary of Contents for ZAHD 150/200
Page 2: ......
