ZAHD, ZAEHD 150/200-155/175
Testing and verification
61
www.zepro.com
11
Testing and verification
Testing and verification of the tail lift takes place in accordance with the installation/delivery inspection. Verify
that the tail lift is suitable for the vehicle in question and for the intended use.
11.1
Static load test
11.1.1
Deformation
•
Position the tail lift half way up to the vehicle floor level and with the platform in the horizontal position.
Measure dimensions A-B-C-D for comparison as illustrated. Image 87.
• Place a test load on the platform according to the table for the respective tail lift model and lifting capacity.
• Remove the test load from the platform.
•
Repeat the measurement of A-B-C-D and verify that there has been no deformation of the lift or its fixing.
11.1.2
Drift
• Place a test load on the platform according to the table. The tail lift must be at the same level and angle
as the vehicle floor.
Leave the test load for 15 minutes.
• Verify that the platform drift is no more than 15 mm on the vertical (points A and D) and 2º in terms of the angle.
11.1.3
Static load (Test load 1.25 x tail lift loading capacity). For tail lifts with load
centre of 750 mm
Capacity
Load 1500 kg
Load 2000 kg
Distance out in platform (L)
1500 kg
940 mm
-
2000 kg
1250 mm
940 mm
Image 87. Testing and verification
Max 2º
Max. 15 mm
B
D
C
A
B
D
C
A
Vehicle floor level
Deformation
Drift
Summary of Contents for ZAHD 150/200
Page 2: ......
