Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
3
DOCUMENT UPDATES
Version
Changes
Page(s)
[1.1]_a
Changes in application program:
•
Thermostat: possibility of periodically sending, if
parameterised, the control variable corresponding to
the currently inactive mode (parameter “Send both
H/C control signals periodically?”).
•
Thermostat: parameter revision (some parameters
were being shown unnecessarily).
•
Minor functional changes in the Welcome Back object
(the usual button action is no longer performed
together with the transmission of the Welcome Back
object) and the Touch Lock functions.
•
Improvement in the “Reset Luminosity after No
Detection” function.
•
Minor changes in texts and object DPTs.
-
Replacement of Figure 6
12
Clarification of the Enabling parameter (Normal and Night
light modes)
14
Revision and clarification about the Touch Lock function.
16
Revision and clarification about the Welcome Object
function.
16 - 18
Revision of the Lock function within the Inputs section.
38 - 39
Update of the Communication Object Table
44
Revision of styles and minor mistakes.
-
