Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
29
performed at any time, an order to move the shutter entirely down (“1”) will
be sent through the “[Xi] Move shutter (toggle dir.)” object. The next long
touch will send an order to move it entirely up (“0” through the same object).
A third long touch will cause that the value “1” is sent again, and so on for
further long touches.
In this case, the LED corresponding to the button will always implement the
already-defined “Regular” behaviour (the LED will stay “ON” for some instants
after the press).
3.4
ADDITIONAL BUTTONS
This tab, which permits defining the specific functions that will be performed by the
additional buttons of the device (see section 2.2), is itself divided into a series of
windows, among which the only one visible by default is Configuration.
Figure 15
Configuration (Additional Buttons)
From the Configuration window it is possible to select (parameter “Function”) the
desired functions for the five buttons that constitute the additional button panel,
according to the following list:
Disabled
.
Temperature Setpoint
.
1-byte control (Unsigned Int.)
.
1-byte control (Scaling)
.
Individual Buttons
:
Disabled
1-bit
1-bit (Hold & Release)
Scene
1-byte Constant (Unsigned Int.)
1-byte Constant (Scaling)
2-byte Constant (Unsigned Int.)
2-byte Constant (Float)
Dimmer
Shutter
