Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
36
Figure 24
Short Press: Shutter (Inputs > Push Button)
The available actions are: Move shutter up (the value “0” will be sent),
Move shutter down (the value “1” will be sent), Move shutter (toggle
direction) (after the first press the value “1” will be sent, while after the
second press the value “0” will be; and so on after any subsequent press,
commuting the value every time), Stop / Step up (the value “0” will be sent),
Stop / step down (the value “1” will be sent) and Stop / step (toggle
direction) (after the first press the value “1” will be sent, while after the
second press the value “0” will be; and so on after any subsequent press,
commuting the value every time).
Light Dimming
: the KNX bus will be sent orders for light-dimming devices
through the “[Ix] [Short press] ACTION”, where “ACTION” will depend on
the action selected in the corresponding screen displayed by ETS:
Figure 25
Short Press: Light Dimming (Inputs > Push Button)
The available actions are: Light OFF (the value “0” will be sent), Light ON
(the value “1” will be sent), Light ON/OFF (Toggle) (after the first press the
value “1” will be sent; after the second press, the value “0” will be; and so
on after any subsequent presses, commuting the value every time),
Decrease light / Stop dimming (Toggle) (after the first press the bus will be
sent an order to decrease the light level according to the parameterised
light step: 100%, 50%, 25%, 12.5%, 6.25%, 3.1% or 1.5% (see
Table 2
),
while after the second press, the value “0” will be sent; and so on after any
subsequent presses, commuting the value every time), Increase light / Stop
