Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
35
Figure 22
Push Button (Inputs)
The available options are:
Short press
: sets the action to be performed when a short press takes place:
No Action
: no action will be performed.
1-bit Generic Control
: on button presses, the KNX bus will be sent the “[Ix]
[Short press] 1-bit generic control: B” binary object with value B, where B
(“0”, “1” or a value that commutes with every press), with the possibility of
making this value be re-sent periodically. This can be parameterised from
the new screen displayed by ETS (see Figure
Figure 23
). Note that it is
possible to set different cyclical periods for re-sending the values “0” and
“1” in case of sending alternate values with every button touch. The cycle
times should be between 0 (the object will not be re-sent) and 255 seconds.
Figure 23
Short Press: 0/1 (Inputs > Bush Button)
Shutter Control
: button presses will make the device send the KNX bus a
certain shutter control order through the “[Ix] [Short press] ACTION”, where
“ACTION” will depend on the action set in the corresponding window
displayed by ETS:
