Touch-MyDesign
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
12
3.2
GENERAL
The windows under the “General” tab permits configuring the basics of the device. The
only of them that is active by default is “Configuration”.
Figure 6
Configuration (General)
Touch-MyDesign Orientation.
Defines the orientation (horizontal / vertical)
of the device, with the aim of implementing a logical behaviour in the buttons.
Figure 7
Device Orientation
Next to “Touch-MyDesign Orientation”, a second parameter is shown, “
Pair
button behaviour
”. The selectable values for this parameter will depend on
the selection made for the former parameter.
Table 1
shows the possible
behaviours of the pair buttons. The option selected here will affect every
button configured as a pair control. Note that if the device is mounted with a
layout inverted to what is shown by
Figure 7
(i.e., with the additional buttons
