62 Rev.A
Setting
Operation
Status bar fade
in-out
Tap to automatically display and hide the status and information bar.
Off: The status bar and the date and time are permanently displayed.
On: The status bar, the date and the time are automatically displayed and
hidden (display time approx. 15 sec.).
Button colour
Tap to set the button/sensor colour. Possible settings: Amber (Bernstein) /
white
LFB assignment
(analogue teach-in)
Tap on the setting [LFB assignment] to call up the steering wheel remote
control teach-in page.
Tap the mode to set the required steering wheel support and predefined
button assignment.
Possible settings:
Mode 1
➔
Fiat Ducato III series 7
Mode 2
➔
Fiat Ducato III series 8 & 9 (factory setting)
Bluetooth
Tap to activate or deactivate the Bluetooth module.
Off: The ZENEC Bluetooth module is deactivated.
On: The ZENEC Bluetooth module is activated.
Set-up assistant
restart
Tap to call up the ZENEC set-up assistant again.
INFO:
The changed settings are automatically stored and taken over after
successful operation of the set-up assistant.
Delayed device
shut-off
< >
< >
Tap the arrow keys to set the required switch-off delay.
Possible timer settings: OFF, 15min, 30min, 45min.
INFO:
After switching off the ignition, the ZENEC system remains on for
the set timer time. when the timer time expires, the ZENEC is automatically
shut down and switched off.
NOTE:
During the cold winter periods, or if the battery is weak, we do not
recommend setting any switch-off delay (timer time) whatsoever.
AUDIO SETTINGS
You wish to adapt the sound and the volume to your requirements. In the Audio settings you have the
possibility of making various audio-related settings such as equalizer / sound playback, subwoofer,
run-time correction audio crossover and more. The sound settings are set comprehensively for all
audio sources.
CALL UP AUDIO SETTINGS
1. Call up settings.
or
Call up app list and tap the settings source symbol.
2. Tap on “Audio” to call up the audio settings.
3. Make the required settings, see following table. The changes are taken over automatically.
Summary of Contents for Z-E3776
Page 1: ...EN Z E3776 INFOTAINER OPERATING INSTRUCTIONS...
Page 83: ...83 Rev A...
