background image

86 Rev.A   

CERTIFICATION / MANUFACTURER

Operating frequency / maximum transmission power

This is a class B product (Wi-Fi) or class 1 product (Bluetooth), via the integrated, combined Wi-Fi/Bluetooth module. 

Wi-Fi

Wi-Fi standard: 2.4G: IEEE802.11 b/g/n, 5G: IEEE802.11 a/n/ac

Transmission range: Up to 100 m

Transmission frequency bands: 2.4GHz + 5GHz 

Transmission power: 17 dBm/60 mW max., 10 dBm/10 mW min.

Transmission profiles: Wi-Fi-AP (access point, WiFi station 

Bluetooth

Bluetooth standard: v5.0 + EDR

Transmission frequency band: 2402 MHz ~ 2480 MHz

Bluetooth class: Class 1 

Transmission power: 9dBm / 9 mW

Information concerning radio frequency exposure

This device fulfils the EU requirements (2014/53/EU Article 3.1a) for the limitation of exposure of the general public to 

electromagnetic fields in terms of health protection.

Do not use this device in locations in which wireless devices are not permitted.

ZENEC cannot guarantee that no accidents or damage will occur if the device is used incorrectly. Use this product with 

care and at your own risk.

 

Recycling instructions

This product bears the symbol for selective sorting of used electrical and electronic equipment (WEEE). This means that 

the product must be handled in accordance with European directive 2012/19/EU in order to be recycled or disassembled 

in order to minimise the effects on the environment. The user has the choice of handing over his product to a competent 

recycling organisation or to the retailer, if a new electrical or electronic device has been purchased.

Summary of Contents for Z-E3776

























































































Reviews: