31 Rev.A
CALL LISTS
The last outgoing, missed and incoming calls are synchronised from the mobile phone with the
ZENEC handsfree device. This procedure can take several minutes depending on the number of
contacts. The transmission only takes place from the currently coupled mobile phone.
Display all call lists:
1. Call up Bluetooth source.
2. Tap on
in the Bluetooth control/operating list to call up the call list overview. The following call
lists are displayed:
• Missed calls
• Accepted calls
• Outgoing calls
Tap on the “
+
” symbol to display the detailed call list. A symbol following the respective list also
shows what kind of call list it is.
Function
Symbol
Meaning
Missed calls
This symbol indicates that the calls have been missed and could
not be accepted.
Entries with this symbol designate calls in absence.
Accepted
calls
This symbol indicates that the calls are incoming and have been
accepted.
Entries with this symbol designate accepted calls.
Outgoing calls
This symbol indicates that the calls are outgoing.
Entries with this symbol designate outgoing calls. Only the
entered numbers can be seen in the list.
BT Music – A2DP
The A2DP (Advanced Audio Distribution Profile) BT connection permits an audio signal such as
music to be transmitted in stereo quality via Bluetooth. This makes it possible for Media Player
control elements such as Play, Pause and Skip from coupled terminal devices which are in audio
playback mode to be used via the ZENEC. The display of iD3 Tag metadata is only possible is this is
present on the tracks streamed via the Smartphone.
Function requirements
• Compatible device with Bluetooth interface.
• ZENEC system is ready for operation.
• Existing Bluetooth connection (coupling) between ZENEC and the Bluetooth device such as a
Smartphone etc.
Summary of Contents for Z-E3776
Page 1: ...EN Z E3776 INFOTAINER OPERATING INSTRUCTIONS...
Page 83: ...83 Rev A...
