8
Product description
626140-9149-911
Operating manual TEMPAR console V9.0
Fig. 2:
Temperature monitor with mobile measuring stand
The electronic sensor control saves the calibration data and adjustment
values of the sensor and converts the measured value from analogue to
digital. The console reads the measured value from the sensor and
processes it.
The default configuration envisages 9 temperature sensors. However this
can be supplemented with additional temperature sensors but also
sensors for other physical quantities.
The display of measured values makes it quick and easy to see whether
the environmental conditions lie within or outside of the valid range for
the measurement. The console is operated via the touchscreen monitor.
Alternative the system can be operated with any web-enabled terminal
device.
Note that, while the TEMPAR system displays valid values for the
measuring room, the conditions in the measuring range of the
coordinate measuring machine and the workpiece temperature are not
taken into account. These conditions must be recorded and evaluated
separately.
The calibration requires that one of the temperature sensors is calibrated
by a certified DAkkS laboratory. The other eight sensors are
factory-calibrated, with the DAkkS-calibrated sensor serving as a
reference. The optional sensors for air pressure, humidity and airflow can
also be calibrated at the factory or by DAkkS. All sensors are shipped with
a calibration certificate.
