24
Operation
626140-9149-911
Operating manual TEMPAR console V9.0
3.2.6
"System" menu
Fig. 20:
"System" menu
The sensor calibration data are displayed in the "System” menu. The
sensors are displayed in different groups dependent on the calibration.
The name of the sensors, which can be specified under Configuration >
Measuring room > Sensors, is shown under the sensor name column.
(See chapter "3.2.18 "Configuration > Measuring Room > Sensors"
menu")
For DAkkS-calibrated sensors, the value under "Correction" refers to the
deviation from the standard temperature of the calibration laboratory. For
the factory-calibrated sensors, the value represents the deviation from the
DAkkS-calibrated sensors.
The "Test Laboratory" column shows the identification code of the test
laboratory.
