All rights reserved
© 2019 Carl Zeiss 3D Automation GmbH
This document, including all illustrations, is subject to copyright. Any use beyond the strict limits of
copyright law permission without the permission of the manufacturer is strictly prohibited and punishable
by law. This applies in particular to reproduction, translation, microfilming, and storing or processing by
electronic means.
The replication of trade names and such in this document does not justify the assumption that such
names should, in the sense of trademark and brand protection legislation, be regarded as unused and
therefore usable by anyone.
Layout, illustration, photos and texts: Carl Zeiss 3D Automation GmbH
Printed in Germany 03/2019
Product information
Designation
TEMPAR - Automatic temperature monitor
for coordinate measuring machines
Product no.
626140-9149-831
Manufacturer
Carl Zeiss 3D Automation GmbH
Carl-Zeiss-Straße 27
73431 Aalen
Germany
www.probes.zeiss.com
Document version
This document is only valid until a newer version is published. The most
recent version should always be used. Invalid versions must no longer be
used.
Article no. Document
Version
Date
Note
626140-9149-911
9.0
19.03.2019
valid
