background image

94

Operation

G-30-1346-en

 S8 Floor Stand  

Issue 4.0
Printed on 05. 06. 2001

OPMI

®

 Vario: selecting the magnetic clutches to be released

The middle section (SELECT BRAKES:) of the display and key field in
configuration mode 3 offers you the following options:

Selection
At each press of the "

" or "

" key, the program jumps from one possible

configuration to another.

Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.

Caution:

Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID. 

You can define which magnetic clutches are to be released when key "B"
(3) of the left and/or right handgrip is pressed.

1

2

3

XY - Z The magnetic clutches for the XY and Z movements can be re-

leased separately by pressing key "B" (3) in the left or right 
handgrip respectively.

To release the magnetic clutches for XY movement only: 
press key "B" (3) in the left handgrip.

To release the magnetic clutches for Z movement only:
press key "B" (3) in the right handgrip.

To release all magnetic clutches, i.e. those of the ceiling
mount (floor stand) (for XY and Z movement) and of the sur-
gical microscope (for rotary and tilt movements): 
simultaneously press keys "B" (3) both in the left and right
handgrips.

ALL

All magnetic clutches are always released, i.e. those of the 
ceiling mount (floor stand) (for XY and Z movement) and of the 
surgical microscope (for rotary and tilt movements), no matter 
whether you press key "B" (3) in the left or right handgrip.

Path: The basic mode is automatically displayed after the instrument has

been switched on.
To access configuration mode 3 from the basic mode, go via con-
figuration modes 1 and 2. 
For this, simultaneously press the "MODE" and "STORE" keys
three times in succession:
1. Jump from the basic mode to configuration mode 1,
2. Jump from configuration mode 1 to configuration mode 2,
3. Jump from configuration mode 2 to configuration mode 3.

MODE

STORE MANUAL

EYE-

PIECE:

10x

SELECT

BRAKES:

ALL

Configuration 

mode 3

Summary of Contents for S8





















































































































































Reviews: