Zeiss S8, Instructions For Use Manual

Page: 10 / 148

10
Safety
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
The instrument described in this manual has been developed and tested
in accordance with Carl Zeiss safety standards and with national and in-
ternational regulations. A high degree of instrument safety is thus en-
sured.
We would like to inform you on the safety aspects involved in operating
the instrument. This chapter contains a summary of the most important
precautions to be observed.
Further safety notes are also contained in other parts of this user's
manual; they are marked with a warning triangle containing an exclama-
tion mark as shown here. Please pay special attention to these safety
notes.
Safety is only ensured when this instrument is operated properly. Please
read through this manual carefully before turning the instrument on. Also
read through the user's manuals of the other equipment used with this in-
strument. You may obtain further information from our service organiza-
tion or authorized representatives.
Directives and standards
The instrument described in this manual has been designed in compli-
ance with the following standards:
– EN
– IEC
– UL
– CSA
In accordance with Directive 93/42/EEC, Annex II, Article 3, the quality-
management system of Carl Zeiss has been approved by TÜV Rheinland,
which is a notified body. The registration number is: 95 102 7601.
• The instrument must be connected to a special emergency backup
line supply in accordance with the regulations or directives which ap-
ply in your country.
• This is a class I instrument as defined by Directive 93/42 /EEC.
• Please observe all applicable accident prevention regulations.