Zeiss S8, Instructions For Use Manual

Page: 40 / 148

40
Description
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Display field with control keys
The display field with control keys has been integrated in the control
panel.
The surgical microscope on the ceiling mount (floor stand) can be con-
trolled either manually or electronically. The software required for elec-
tronic control has been installed in the electronics box of the ceiling mount
(floor stand). You operate this software via the display and key field which
permits you to view and re-configure the current settings.
The display and key field is structured as follows:
– Three displays (LCD) with the associated "
∇
" and "
∆
" keys.
– A row of keys comprising the keys "MODE", "STORE" and "MANUAL"
and the yellow LED above the "MANUAL" key.
User interface
The user interface of the ceiling mount (floor stand) consists of the three
displays and the keys located beside and below them.
For the settings, a "
∇ " and " ∆ " key pair is provided for each display.
The control functions have been combined in several modes (menu
pages). In the normal operating status, the basic mode is always dis-
played. The control functions shown in this mode vary, depending on the
surgical microscope installed.
In the basic mode for OPMI
®
Vario on the ceiling mount (floor stand) as
shown in the illustration, for example, the following is displayed:
– the current lamp brightness in the upper display,
– optionally the working distance or total magnification in the middle dis-
play,
– the current user ID in the lower display.
Keys
Three keys and an LED are provided below the displays.
Use the "MODE", "STORE" and "MANUAL" keys to select the different
control functions (modes).
"MODE" key and "STORE" key
The "MODE" and "STORE" keys permit you to access the different modes
of the user interface. For details, please see the chapter "Operation".
MODE STORE MANUAL
USER
1
220 mm
1
1.5
Basic mode