Zeiss S8, Instructions For Use Manual

Page: 106 / 148

106
Operation
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
OPMI
®
VISU 150 / 200: selecting the magnetic clutches to be re-
leased
You can define which magnetic clutches of the ceiling mount (floor stand)
are to be released when the keys on the left and/or right handgrips (1) and
(2) are pressed.
The top section (SELECT BRAKES:) of the display and key field in confi-
guration mode 2 offers you the following options:
Selection
At each press of the "
∇
" or "
∆
" key, the program jumps from one possible
configuration to another.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
XY - Z The ceiling mount's (floor stand’s) magnetic clutches for the XY
and Z movements can be released separately by pressing key
(1) or (2) in the left or right handgrip respectively.
• To release the magnetic clutches for XY movement only:
press the key in the left handgrip (1).
• To release the magnetic clutches for Z movement only:
press the key in the right handgrip (2).
• To release all magnetic clutches, i.e. those of the ceiling
mount (floor stand) for XY and Z movement:
simultaneously press the keys in the left and right hand-
grips (1) and (2).
ALL All magnetic clutches are always released, i.e. those of the
ceiling mount (floor stand) for XY and Z movement, no matter
whether you press the key in the left or right handgrip (1) or (2).
Path: The basic mode is automatically displayed after the instrument has
been switched on.
To access configuration mode 2 from the basic mode, go via con-
figuration mode 1.
For this, simultaneously press the "MODE" and "STORE" keys
twice in succession:
1. Jump from the basic mode to configuration mode 1
2. Jump from configuration mode 1 to configuration mode 2.
1
2
Configuration
mode 2
MODE
STORE MANUAL
SELECT
BRAKES:
ALL