Zeiss S8, Instructions For Use Manual

Page: 110 / 148

110
Operation
G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
OPMI
®
PRO magis: setting the lamp brightness
This control function permits you to select the brightness of the lamp.
For OPMI
®
PRO magis, the ceiling mount (floor stand) can be equipped
either with two halogen illumination systems or one xenon illumination sy-
stem.
Two halogen illumination systems, lamp 1 and lamp 2
In the basic mode, the current brightness setting of lamp 1 is displayed in
the top display. The middle display shows the current brightness setting
of lamp 2.
One xenon illumination system, lamp 1 only
In the basic mode, the current brightness setting of the xenon illumination
is displayed (as lamp 1) in the top display.
The middle display remains blank, and the associated "
∇
" and "
∆
" keys
have no function.
Setting the brightness of the lamp
Use the "
∇
" and "
∆
" keys to adjust the brightness of the lamp.
Brightness is adjustable in a range from 1 to 10 in steps of 0.5.
The last brightness setting for the lamp is automatically stored under the
current user ID.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
OPMI
®
PRO magis: setting the adjustment speeds
You can select the adjustment speeds for the following functions of the
surgical microscope:
– Focusing
– Zoom function
– Adjustment of X-Y coupling
Changing the settings
The speed mode is the user interface where you can select the speeds of
the surgical microscope functions.
Path: The basic mode is automatically displayed after the instrument has
been switched on.
Path: The basic mode is automatically displayed after the instrument has
been switched on.
Press the "MODE" key to access the speed mode.
Basic mode
MODE STORE MANUAL
USER
1
1
5.0
2
5.0
Speed mode
MODE STORE MANUAL
FOCUS
SPEED:
6.0
ZOOM
SPEED:
5.0
XY
SPEED:
6.0