Zeiss S8, Instructions For Use Manual

Page: 87 / 148

G-30-1346-en S8 Floor Stand Issue 4.0
Printed on 05. 06. 2001
Operation
87
Rollover
Select the function required using a rollover run in the sequence defined
in the above table.
At each press of the "
∇
" key, you advance in clockwise direction. At each
press of the "
∆
" key, you advance in counterclockwise direction:
→
OFF
→
HIGH
→
↑ ↓
←
LOW
←
MEDIUM
←
Caution:
Be extremely careful when changing these settings. You should change
settings only under your own user ID. Notify all users of any changes, or
make sure that each user only works under his own user ID.
Saving parameter settings
As soon as you have entered a parameter setting, it is saved under the
current user ID.
Path: The basic mode is automatically displayed after the instrument has
been switched on.
To access configuration mode 2 from the basic mode, go via con-
figuration mode 1.
For this, simultaneously press the "MODE" and "STORE" keys
twice in succession:
1. Jump from the basic mode to configuration mode 1
2. Jump from configuration mode 1 to configuration mode 2.
Path: To return to the basic mode, press the "MODE" key in the configu-
ration mode or do not press any key for 20 seconds.
To access the next configuration mode 3, simultaneously press the
"MODE" and "STORE" keys.