Zeiss Primostar 3, Instruction Manual

Page: 50 / 112

4 Installation | 4.3 Installing Additional Components ZEISS
4.3.7 Installing the Primostar 3 HD IP Camera
Prerequisite
ü The microscope is unplugged from mains power.
ü Stand without small hand lift
ü RJ12 cable
ü If needed, mount the reflected-light fluorescence illuminator iLED onto the stand first, see In-
stalling the Reflected-light Fluorescence Illuminator iLED onto the Stand [
}
44] . Then, mount
the Primostar 3 HD IP camera onto the reflected-light fluorescence illuminator iLED in the
same way as described below.
Procedure 1. Remove the tube, see Installing or Changing the Tube [
}
43] .
2. Unscrew the cover plate.
3. Insert the Primostar 3 HD IP camera, at the cor-
rect angle and slightly inclined with its dovetail
mount into the stand.
4. Position the Primostar 3 HD IP camera horizon-
tally.
50 Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en