Zeiss Primostar 3, Instruction Manual

Page: 42 / 112

4 Installation | 4.1 Safety during Installation ZEISS
4 Installation
Perform only the installation work described in this document. All other installation work not de-
scribed below may only be carried out by an authorized ZEISS service representative.
4.1 Safety during Installation
Before installing and starting up the microscope, be sure to carefully read and observe the notes
on instrument safety, see
Safety [
}
9] .
NOTICE
Pollution of the optics
Dirty optics impair the function of the microscope.
4
Do not touch optical surfaces when unpacking the microscope to avoid fingerprints!
4.2 Prepare Installation
The microscope is supplied completely assembled and including accessories that are packed to
commercial standards.
Additionally ordered components, such as sliders, and the transmitted-light module with illuminat-
ing mirror or reflected-light fluorescence illuminator, are delivered in separate packages and must
be mounted to the microscope.
Procedure 1. Remove the microscope from the transport case and place it on the work table.
2. Retain the original packaging for longer-period non-use storage of the instrument or for re-
turn to the manufacturer.
42 Instruction Manual ZEISS Primostar 3 | en-US | Rev. 1 | 415501-7011-111_en