Zeiss DirectFRAP Operating Manual Download Page 31 | Manualshive

Page: 31 / 62

Zeiss DirectFRAP Operating Manual Download Page 31

INSTRUMENT DESCRIPTION

DirectFRAP

Optical Fibers for the Application of the DirectFRAP Laser Manipulation Slider

Carl Zeiss

05/2014

423635-9001-701

31

The following objectives are recommended for laser manipulation:

Designation

Order number

Objective

α

Plan-Fluar 100x/1.45 Oil M27

421190-9900-000

Objective

α

Plan-Apochromat 100x/1.46 Oil DIC M27

420792-9800-000

Objective Plan-Apochromat 63x/1.40 Oil DIC

420782-9900-000

Objective EC Plan Neofluar 40x/0.75

420360-9900-000

Objectives with lower magnification or phase contrast objectives are not suited for laser
manipulation.

2.6

Optical Fibers for the Application of the DirectFRAP Laser Manipulation Slider

The optical fiber needed for this application is mounted to the laser manipulation slider and factory-
adjusted by the manufacturer during system integration. It is delivered along with the slider.

Breaking the seal voids the warranty for the optical fiber!

The optical fibers correspond to the specifications included in the Technical Data (see section 2.9 on

page 33).

2.7

Suitability of Lasers for the Application of the DirectFRAP Imaging System

The recommended wavelengths for laser manipulation are 405 nm (50 mW) and 488 nm (100 mW).

«
...
29
30
31
32
33
...
»

Summary of Contents for DirectFRAP































































Reviews:

No comments