Zeiss CONTURA, Operating Instructions Manual

Page: 73 / 158

Preparations for start-up
61211-1310402 CONTURA
6-5
1 Set screws
3 Slide the frame supports along the guide profile out of the measur-
ing area.
The qualification points of the stylus system holders must remain
within the measuring range.
4 Align the profile rail (< 0.1 mm/m).
5 Retighten the set screws.
Fastening the changer rack with mounting brackets
(option)
For special applications, it is possible to fasten the changer rack using
mounting brackets. This makes a continuous adjustment of the foot pro-
file in the Y axis possible.
1 Mounting bracket with screw M12, DIN 912
1 Hook the first mounting bracket into the side longitudinal slot of the
foot profile and screw the mounting bracket onto the measuring ta-
ble.
2 On the opposite side, loosen the set screws on the spacer and the
frame support.