Zeiss CONTURA, Operating Instructions Manual

Page: 102 / 158

Safety during the measuring operation
7-6
61211-1310402 CONTURA
Homing run
After start-up, travel movements may only be carried out to a limited ex-
tent using the joysticks located on the control console. Cause: No end
positions of the axes have been defined yet. Possible consequences:
Danger to personnel and damage to the CMM.
CAUTION
Risk of injury if the travel movement exceeds the end posi-
tions.
Crushing and severing body parts. Risk to the eyes caused by the styli.
Damage to the CMM.
ü
Before performing unlimited travel movements, the end positions
must have been defined.
—
After start-up, home the machine first.
After this, travel movements can be performed without restrictions us-
ing the joysticks.
CAUTION
Risk of injury due to homing run as a result of an automatic se-
quence.
Crushing and severing body parts. Risk to the eyes caused by the styli.
—
Ensure that nobody is endangered by the travel movements.
Electromagnetic fields
CAUTION
Impairment of the function of electronic components due to
electromagnetic fields.
The functioning of active implants may be impaired.
—
Keep a minimum distance of 100 mm from the VAST probe or an-
other magnetic sources such as magnetic clamping equipment.