Zeiss Colibri 7 Operating Manual Download Page 27

Page: 27 / 34

OPERATION

Colibri 7

Controlling the Colibri 7 solid-state light source

ZEISS

02/2017

423052-7344-001

4.2.3

Operation with PC via the ZEN 2.3

(blue edition) software

Colibri 7 has been mounted on the

microscope, connected via CAN and
powered via the desktop power supply

unit.
The microscope and the PC have been

switched on.
The ZEN software (blue edition) has

been started.

4.2.3.1

Control of Colibri 7 with the
"Microscope Control" tool in the

"Locate" tab

•

Click on the

Locate

tab in the software (see

Fig. 16).

•

Expand the

Microscope Control

tool by

clicking on the expander.

•

If required, activate the

Show All

option.

•

Click on the

Colibri 7

icon to open the

Colibri 7

control menu.

After opening, the default mode of the
control menu is

Continuous

•

Switch the LEDs on or off by activating /
deactivating the respective checkbox, e.g.

(see Fig. 17).

•

Adjust the brightness for the selected wave
length using the sliders, entry fields or arrow

buttons.

•

Activate the excitation filter for LED 567 by
clicking on the

555

590

button at

Excitation

filter for LED 567

•

Switch all LEDs simultaneously on or off by
clicking on

Deactivate all LEDs

Activate all

LEDs

•

Click on

Continuous

Gated

to select the

desired mode for image acquisition (see also
next page).

Fig. 16

Colibri 7 control via "Microscope

Components" tool

Fig. 17

Control menu for Colibri 7

Summary of Contents for Colibri 7



































Search results

Summary of Contents for Colibri 7

Reviews:

Related manuals for Colibri 7

Brands by name

Popular brands

Zeiss Colibri 7, Operating Manual

Search results

Summary of Contents for Colibri 7

Reviews:

Related manuals for Colibri 7

Brands by name

Popular brands