START-UP
Colibri 7
Unpacking Colibri 7
ZEISS
02/2017
423052-7344-001
19
3.2
Unpacking Colibri 7
The lamp module, the desktop power supply unit and other optional accessories are supplied separately
in customary packaging.
•
Remove all parts from the packaging.
•
Check them for completeness according to the delivery note.
3.3
Attaching Colibri 7 to the microscope and connecting it
The lamp module is operated via the reflected light mount of the microscope.
In case of microscope systems with laser application, the clamping screw (Fig. 9/
4
) on the
reflected light mount for fastening the lamp module to the microscope is a safety screw and
may only be removed by ZEISS Service (not a customer interface). Otherwise there is a risk of
eye damage upon laser coupling.
In case of microscope systems without laser
applications proceed as follows:
•
Attach dovetail (Fig. 9/
1
) of the lamp module
2
) to the reflected light mount (Fig. 9/
3
).
•
Tighten clamping screw (Fig. 9/
4
).
The lamp module does not require any adjustment.
Depending on equipment variation, the Colibri 7
can be controlled via the TFT display of the
microscope, the control panel, the LED Trigger Box
or via PC.
Fig. 9
Attaching the lamp module to the
microscope
