INTRODUCTION
Colibri 7
Warranty notes
ZEISS
02/2017
423052-7344-001
9
Labels on the reflected light mount of the microscope for laser application with Colibri 7
Fig. 2
Warning label on reflected light mount of microscope
The safety screw (Fig. 2/
1
) on the reflected light mount for fastening the lamp module to the
microscope may only be removed by ZEISS Service (not a customer interface). Otherwise there is
a risk of eye damage upon laser coupling.
1.3
Warranty notes
The manufacturer guarantees that the device is free of material or manufacturing defects upon delivery.
Any defects must be reported immediately and steps taken to minimize damage. If such a defect is
reported, the device manufacturer shall be obliged to correct the default, either by repairing the device or
replacing it with a new one, at the manufacturer’s discretion. No warranty is given for defects caused by
natural wear (particularly of wearing parts) and improper use of the device.
The device manufacturer shall not be liable for damage caused by misuse, negligence or any other
tampering with the device, particularly the removal or replacement of instrument components, or the use
of accessories from other manufacturers. Such actions shall invalidate any warranty claims.
With the exception of the work described in this manual, no maintenance or repair work is to be carried
out on these microscopes. Repairs may only be carried out by ZEISS Service or individuals specially
authorized by ZEISS Service. In the event of a problem occurring with the instrument, please contact the
ZEISS Service in Germany (see page 33) or your local ZEISS overseas representative.
