OPERATION
ZEISS
Controlling the Colibri 7 solid-state light source
Colibri 7
26
423052-7344-001
02/2017
•
Use the control dial to set the brightness for the activated LEDs simultaneously.
If the brightness adjustment of several LEDs is controlled simultaneously, the LEDs which are switched on
are controlled relative to each other. Thus, various adjustment values may be displayed for the LEDs. If an
LED reaches 100 % it cannot be set to a higher value. The remaining LEDs can be controlled
simultaneously, until they have reached their maximum at 100 %. When decreasing the brightness, the
brightness of all LEDs will be decreased in reverse order.
•
To quickly switch on and off all LEDs switched on simultaneously press the
button (Fig. 15/
3
).
•
To activate / deactivate the standby mode press the
button (Fig. 15/
8
).
•
To change the brightness of buttons and display press the
button (Fig. 15/
7
) and set the desired
brightness using the control dial. To finish the setting, press the
button again.
