START-UP
Carl Zeiss
Installing optional components
Axio Examiner
50
M60-2-0003 e 05/2012
3.3.2
Inserting the adjusting aid into the
Axio Examiner.A1 upper
microscope part
•
Remove the cap (Figure 3-33/
1
) from the
assembly opening for the adjusting aid.
•
Insert the adjusting aid (Figure 3-33/
4
), and
screw it to the stand top part using the three
accompanying screws (Figure 3-33/
3
).
•
Put on the cap with the opening
(Figure 3-33/
2
).
•
Slide in the slidable adjusting aid socket.
3.3.3
Installing an adapter for 45 mm
objectives
Only for Axio Examiner.D1/.Z1.
•
Use the shift knob (Figure 3-34/
1
) to move the
objective mount into the WORK position.
•
If required, unscrew the objective or remove the
dust protection cap from the objective mount
or objective nosepiece.
•
Screw in the 30 mm adapter (Figure 3-34/
2
).
•
Screw the objective (Figure 3-34/
3
) into the
30 mm adapter.
Figure 3-33 Inserting the adjusting aid
Figure 3-34 Installing an adapter for 45 mm
objectives
Summary of Contents for Axio Examiner
