Zeiss Axio Examiner, Operating Manual, Page: 55 / 96

START-UP
Axio Examiner Installing optional components Carl Zeiss
M60-2-0003 e 05/2012 55
3.3.10 Installing the Aqua Stop for the
condenser
•
Remove the stage carrier (see section 3.1.12).
•
Connect the discharge hose (Figure 3-42/
2
) to
the Aqua Stop (Figure 3-42/ 1 ).
•
Carefully put the Aqua Stop (Figure 3-42/ 1 ) on
the condenser (Figure 3-42/
3
). The rim must fit
in the slot at the condenser.
•
Run the discharge hose (Figure 3-42/
2
) to a
corresponding vessel (dish, etc.).
•
Put on the stage carrier (see section 3.1.12).
3.3.11 Attaching a condenser carrier with
a motor-operated focus
To install a motor-operated condenser carrier,
follow the same procedure as for a manual
condenser carrier (see section 3.1.9).
•
After assembly, connect the condenser carrier
control cable (Figure 3-43/
1 ) to the lower
microscope part.
Figure 3-42 Installing the Aqua Stop
Figure 3-43 Connecting a mot. condenser carrier