DOC-USR-0135-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
54
9.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus.
9.1
The System Setup Tab
Parameter
Options (default in bold)
Notes
Local IP Setup
Local IP Address
192.168.x.y
(192.168.1.117)
Sets the IP address of the Z3-SBE264-10. Note that
a “save” of these settings and a reboot is needed
for changes to this value to take effect.
Local Netmask
255.255.z.w (
255.255.0.0
)
Sets the netmask of the Z3-SBE264-10. Note that a
“save” of these settings and a reboot is needed
for changes to this value to take effect.
Default Gateway
192.168.a.b (
192.168.1.1
)
Sets the network gateway to use for the Z3-
SBE264-10. Note that a “save” of these settings
and a reboot is needed for changes to this value
to take effect.
DNS Server IP 1
a.b.c.d (
8.8.8.8
)
Used to specify the DNS server for hostname
lookup when in static IP mode (for DHCP mode,
the DHCP server is used as the DNS server).
DNS Server IP 2
e.f.g.h (
8.8.4.4
)
Used to specify the secondary DNS server for
hostname lookup when in static IP mode (for DHCP
mode, the DHCP server is used as the DNS
server).
Use DHCP
Checked
Unchecked
Sets whether DHCP is used to dynamically obtain
an IP address at start up.
Auto Start
Checked
Unchecked
Sets whether to automatically start encoding at
start up.
Device Management
Set Device Name
Sets the name for the Z3-SBE264-10.
Set Password
Sets the system password. See Section 8.4, “
Using the Password Feature” on page 53 for
details.
update device firmware
See Section 8.3, “Making a Firmware Update” on
p.52 for details.
