DOC-USR-0135-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
13
(3)
Connect an Ethernet cable from “Ethernet” on the back of the Z3-SBE264-10 to a switch, router or
other DHCP server on the same network as your Windows PC.
(4)
Connect the 5V power supply, and turn on the power switch. It will take 45-60 seconds to boot.
6.3
Find the Z3-SBE264-10 Using ZFinder
ZFinder is a PC Utility that allows you to find any Z3 Technology product on your network. If you have
not yet downloaded this to your computer, you can find it on the USB drive provided with your system.
(5)
Verify your PC is set to DHCP. If it is set to a static IP address, ZFinder will be unable to discover
your encoder, or it will appear in red and you will be unable to proceed further.
(6)
Run the “ZFinder” PC Utility on your Windows PC(found on the USB Flash Drive provided to you with
your order from Z3 Technology).This software scans your local network for any connected Z3
devices. In the example below, the Z3-SBE264-10 appears on IP 192.168.1.117.
Figure 6 ZFinder with Z3-SBE264-10 Selected
Figure 5 Connecting the Ethernet and Turn on the Z3-SBE264-10
Connect to
Ethernet
Turn on
Power Switch
