DOC-USR-0135-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
52
8.3
Making a Firmware Update
(1)
Run the user interface (Steps (1)-
Error! Reference source not found.
in Section 6.0).
(2)
Select “update device firmware” from the main screen.
(3)
This brings you to the update image screen. In this screen, click on “Browse…”
(4)
This brings you to the File Selection Screen. From here, select the name of the .img file to update
with and click “Open”.
The image file to be used will typically have the word “UPD” in the name.
(5)
Click on “Upload and Update”.
(6)
You will see screens stating that the image is being uploaded and that the flash is being updated.
After about one minute, you should see the main menu again.
(7)
Your encoder is now updated.
Click here
Figure 59 Updating the Device Firmware from the Web Interface
Figure 60 Updater Screen
