FSDI-
DCK-1X
User Instructions
DOC-USR-0131-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
74
PCR Interval
*
(UDP/TSRTP/TSFILE
Only)
(
50
)
Interval assigned to PCR in the TS stream in milliseconds.
PMT PID
*
(UDP/TSRTP/TSFILE
Only)
0 – 8191 (
31
)
PID assigned to PMT in the TS stream.
Video Max Delay
*
(UDP/TSRTP/TSFILE
Only)
(300)
Sets encoder maximum video delay in milliseconds.
TS RATE
(UDP/TSRTP/TSFILE
Only)
125K – 20000K
(
3000K
)
The overall bitrate of the transport stream.
Normally, this value should be set to 1.25 * (video bitrate
+ audio bitrate). This can be set to higher values to allow
leeway for times when many bits are needed to encode.
This can be especially useful for ensuring smooth playback
at lower bitrates.
TS Lowlat Mode
*
(UDP/TSRTP Only)
False
True
Selecting “True” causes the TS muxer to instead send
packets out as soon as it receives them rather than
buffering them. This results in lower latency at the
expense of decreased network efficiency and a less smooth
bitstream. There is a limit of 5Mbps for TS Lowlat Mode.
Must be set to “False” for stream to be compliant with ISO
13818-1 systems specification for transport stream timing.
Authentication
(RTMP/RTSP Only)
Disable
Enable
If authentication is required for the stream, select
“Enable” to enter user credentials.
User (RTMP/RTSP
Only)
Enter a valid stream user name.
Password
(RTMP/RTSP Only)
Enter a valid stream password.
Telop Enable
True
False
Enables Telop display text over video.
