FSDI-DCK-1X User Instructions
DOC-USR-0131-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
33
Figure 30 VLC Media Player Advanced Preferences
6.5.3
Recommended Settings:
When streaming HD video in HEVC/H.265 mode, the following recommended settings can be used for
the best results:
Output
Format
Rate
Control
Bitrate
VLC Network
Cache
Notes
RTSP
CBR
2 Mbps
300 ms
Best latency (approx. 400 ms), no frame skips
TSRTP
CBR
3 Mbps
1000 ms
@ 300 ms, frame skips; @ 1000 ms, no frame skips
UDP
CBR
3 Mbps
1000 ms
@ 300 ms, frame skips; @ 1000 ms, no frame skips
6.6
Stream Multiple Resolutions
The FSDI-DCK-1X supports simultaneous encode into up to three different resolutions, bitrates and
output formats. Each output stream can be set using a separate channel tab. If the CH2 tab is not
present, you can create a second channel by clicking on the
+
tab.
6.7
Encoding KLV Stream
The FSDI-DCK-1X is STANAG 4609/NGA MISP compliant and can place KLV data from the SDI ancillary data
in a UDP stream.
(1)
Return to the user interface.
(2)
Select “HD-SDI” from the Video Source drop down.
(3)
Select “UDP” from the Output Format drop down.
(4)
Select “TRUE” from the KLV Enable drop down. This will reveal the KLV Pid, KLV Bitrae, KLV Mode,
and KLV source settings.
Figure 32 Create Additional Output Channels
Click the “+” Tab
Figure 31 Recommended Settings
