Z3 Technology FSDI-DCK-1X User Manual Download

Page: 49 / 87

FSDI-DCK-1X User Instructions

DOC-USR-0131-03

______________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

8.2.2

Access Advanced Settings

(5)

Under Device Setup, check the Advanced Settings box.

(6)

Click on the

Save

button.

(7)

A pop-up window appears with a message that the settings were saved successfully.

(8)

Return to you channel tab to set additional encoding configuration parameters for your stream. See

Section 10.6, The CH1 Tab (Channel 1), for more information on the advanced settings available for

each streaming output.

(2) Click “Save”

(1) Check “Advanced Settings”

Figure 51 Accessing Advanced Settings

Figure 52 Default UDP Settings (Left) and Advanced UDP Settings (Right)

Summary of Contents for FSDI-DCK-1X
























































































Search results

Summary of Contents for FSDI-DCK-1X

Reviews:

Related manuals for FSDI-DCK-1X

Brands by name

Popular brands

Z3 Technology FSDI-DCK-1X, User Manual

Search results

Summary of Contents for FSDI-DCK-1X

Reviews:

Related manuals for FSDI-DCK-1X

Brands by name

Popular brands