FSDI-DCK-1X User Instructions
DOC-USR-0131-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
70
Video Rate Control
*
VBR
CBR
Selects the encoder rate control mechanism. VBR
(Variable Bitrate) means that the encoding bitrate can
fluctuate within the bitrate statistical period. CBR
(Constant Bitrate) means that a stable encoding bitrate is
ensured within the bitrate statistical time.
Video Quality Mode*
Low Latency
Balanced
High Quality
Selects quality mode for video encoder. Low Latency
optimizes the encoder settings for latency at the expense
of quality and High Quality optimizes the encoder settings
for quality at the expense of latency.
Video Interlace Mode*
(H265(HEVC) Only)
Combined
Separated
In the case of interlaced inputs this selects how the unit
formats the output stream. In Combined mode the top and
bottom fields are combined into a single frame. In
separated mode the fields are set separately for an HEVC
stream. The decoder will need to support field separated
mode. The HE265-
DEC from Z3 supports separated mode.
Gradual Data Refresh
*
True
False
Select
True
to enable refresh of the frame data gradually.
Video Bitrate
(RTP, RTSP and RTMP
Only)
2k – 100M (
2M
)
Textbox for entering video bitrate. For example:
1M = 1,000,000 bits per second
1000k = 1,000,000 bits per second
2.5M = Not a Valid Format
Frame Rate
Full
Half
Quarter
Sixth
Used to encode at less than the input frame rate (for
example, an input frame rate of 30fps with
Half
selected
would cause an output stream of 15fps). If interlaced
input is used then this is used to reduce the number of
fields being encoded.
Latency Mode
High Quality
Balanced
Slider for setting the balance between quality and latency.