<7. Setting Parameters>
7-1
IM 01W07D01-01EN
7. Setting Parameters
WN100 can remotely handle wireless
communication setup, Tag No. setup, monitoring of
self-diagnostic results, according to communication
with the field wireless configuration tool or the
device configuration tool.
7.1 Preparation for Parameter
Setting
This product can be set parameters via infrared port
or field wireless network. When setting parameters
via field wireless network, connect this product
to the field wireless network. For details on how
to connect to the field wireless network, refer to
subsection 6.2 “Connecting to the Field Wireless
Network”. When setting parameters via infrared
port, use the infrared port on front of this product.
Infrared
port
F0701.ai
Figure 7.1
Connecting the Configuration Tool
7.2 Preparing Software
Before using the device configuration tool, confirm
that CF and DD for this product are installed in the
device configuration tool.
Please contact Yokogawa for the latest information
on CF and DD.
CF(Capabilities File)/DD(Device Description)
A CF file contains information, such as the vendor
of the field device, its model and revision, available
types of process data (flow rate, temperature,
pressure, etc.), and number of data items. A DD file
contains the information on parameters, such as
data structures and attributes.
ISA100 Built-in DTM
ISA100 Built-in DTM (Device Type Manager) is
driver software for field devices provided based on
the FDT (Field Device Tool) technology.
Import DD file on FieldMate to use ISA100 Built-in
DTM for WN100.
The field wireless configuration tool or the device
configuration tool allows to read the device
information.
Refer to subsection 8.2 “Recommended Products
List” for the field wireless configuration tool or the
device configuration tool of our recommendation.
